In the process of use, under the condition of cantilever, the floor bearing plate is only used as a permanent template. The cantilever length can be determined according to the cross-section characteristics of the floor bearing plate. In order to prevent the cantilever slab from cracking, the bearing should be reinforced according to the design of the structural engineer.
When the floor bearing plate is placed on the steel beam, the probe should be prevented. When laying, operators should wear safety belts and ensure that they are fixed on the surrounding safety ropes while laying. Penetration spot welding is adopted for welding. Before welding, it is necessary to prepare leftover materials for arc striking test welding and adjust welding current.
In the process of construction, floor bearing plate is a very important auxiliary material, and has a very important role. It is mainly used as permanent formwork, and can also be selected for other purposes. The embossing on the surface of the profiled plate makes the maximum binding force between the floor bearing plate and the concrete, and makes them form a whole. The floor bearing plate system has high bearing capacity with stiffeners.
Because there is no horizontal formwork and vertical support at the bottom of the floor bearing plate, the distribution should not be too concentrated when pouring concrete, and the plate vibrator should be used to vibrate in time. The products are widely used in power plants, power equipment companies, automobile exhibition halls, steel structure plants and other projects. If you need products, you are welcome to inquire.